Σέλα επιδιόρθωσης
Συμπαγές εξάρτημα κατασκευασμένη από 2 σέλες HD-PE για την επισκευή μικρής ζημιάς σωλήνων. Με εκτεθειμένα θερμαντικές αντιστάσεις για βέλτιστη μεταφορά θερμότητας.
Compact fitting manufactured from 2 HD-PE saddles for the repair of minor pipe damage. With exposed heating elements for optimal heat transfer.
PE 100 SDR 11
Maximum working pressure 16 bar (water)/10 bar (gas)
| Κωδικός προϊόντος | product.detail.attribute.d1Small | BX | PU | H | B1 | B2 | Weight kg |
|---|---|---|---|---|---|---|---|
| 612519 | 63 | 20 | 360 | 106 | 105 | 104 | 0,260 |
FRIALEN-Safety Fittings can be fused to pipes of SDR stages 11 to 17.6. Minimum wall thickness s min ≥ 3 mm. Other SDR-stages on request. Please observe the marking directly at the product, which is mandatory.
DVGW-Registration No.: DV-8601AU2248
Areas of Application
The FRIALEN-Reinforcing Saddles are used for the repair of minor pipe damage with no escape of fluid, especially to reinforce crushed zones and points with external damage.
Assembly Instructions
The fusion of the HD-PE pipe with the FRIALEN-Reinforcing Saddles takes place by FRIALEN-fusing – leakproof and longitudinally strong.
Both HD-PE saddles have to be prepared according to the general installation instructions (see “Assembly Instructions” for “FRIALEN-Safety Fittings for house connections and distribution pipes up to d 225”). This involves removing the oxide skin and cleaning the pipe covered by the saddles.
Good reasons for using the FRIALEN-RS:
Compact construction
HD-PE saddle with exposed heating element for optimal heat transfer
Preassembled unit without loose parts
Extra wide fusion zone
Additional barcode for tracing back the underground fitting (Traceability-Coding)