SPA

Balloon shut off saddle

Balloon shut off saddle SPA

Gas, water and H2
Working pressure: MOP (gas) 10 bar, PFA (water) 16 bar
Material: PE 100-RC and brass
Saddle component with clamp
Safety technology

Note:

Brass female and male threads are anchored in the HD-PE in a non-detachable and non-rotatable manner.

Including brass plug with recessed square. For the accommodation of commercially available balloon setting devices.

Access protection for the dome by means of the supplied screw cap or by fusion on a FRIALEN SPAK (for d 63 by cap DK, Order No. 612310 ).

When using hydrogen, the SPA Balloon shut off saddle is only in conjunction with the cap SPAK (Order No. 612311).

PE 100-RC SDR 11

Maximum permissible working pressure 16 bar (water) / 10 bar (gas)

	Reference	d₁	Rp	BX	Pallet quantity	R	t	H	B1	Drilling Ø da	Weight [kg]
¹	612753	63	1 1/8"	20	360	1 1/2"	19	151	108	31	0,610
	612677	90	2"	16	128	2 1/2"	24	197	156	56,5	1,390
	612750	110	2"	12	96	2 1/2"	24	217	178	56,5	1,480
	612751	125	2"	12	96	2 1/2"	24	232	190	56,5	1,690
	612752	160	2"	8	64	2 1/2"	24	267	230	56,5	1,830
	612754	180	2"	7	56	2 1/2"	24	287	235	56,5	1,830
	612755	200	2"	6	48	2 1/2"	24	307	252	56,5	1,910
	612756	225	2"	5	40	2 1/2"	24	332	258	56,5	1,920

¹ SPA d 63 can only be fused with pipes of the SDR level 11.

Areas of Application

FRIALEN-Shut off Saddles SPA are used to shut off the medium using commercially available balloon setting devices or for venting / flushing.

FRIALEN safety fittings are fusion-capable with PE pipes according to the specifications of the SDR pipe series on the barcode sticker/datasheet of the respective fitting. The minimum wall thicknesses specified in the standards EN1555-1, EN 12201-1 and ISO 4437 must be observed.

Assembly Instructions

The fusion of the HD-PE main line with FRIALEN-Shut off Saddles SPA are carried out by FRIALEN-fusing – tight and longitudinally force-locking.

Pipe and saddle are prepared according to the general assembly requirements (see assembly instructions: „FRIALEN safety fittings for sustainable pipes for gas, water networks and industrial systems made of PE“) (remove/clean oxide layer from pipe).

Good reasons for using the FRIALEN-Shut off Saddles SPA:

Compact construction
Open wire technology for direct heat transmission
Preassembled unit without loose parts
For use with commercially available balloon setting devices and for tapping into the main pipe
Long and solid brass external thread for a safe connection of the shut off equipment
Brass internal thread for a safe sealing with a plug, permanently attached and rotationally safe anchored in the HD-PE
Includes brass plugs with recessed square drive
Access protection for the dome is provided by the supplied screw cap or by fusing on a FRIALEN SPAK or DK
Additional barcode for tracing back the underground fitting (Traceability-Coding)