MR1 - Reducer

PVC pressure fittings.

Reducer with solvent weld double socket.

PVC (polyvinyl chloride) fittings for use in pressurised Irrigation Systems, water adduction, chemical installations and for water treatment in general.

Go back Data sheet

Reference	system	Category	family	series	D x D	PN	L₁	L₂	Z	E₁	E₂	Fig.	g
1RMR111I00	PVC-U system	Manual valves	Ball valves	TKD DN 10÷50	110 x 90	16	61	51	6	129	106	A	528
1RMR113L00	PVC-U system	Manual valves	Ball valves	TKD DN 10÷50	125 x 110	16	69	61	24	145	129	B	809
1RMR115L00	PVC-U system	Manual valves	Ball valves	TKD DN 10÷50	140 x 110	16	76	81	25	160	129	B	1166
1RMR120A00	PVC-U system	Manual valves	Ball valves	TKD DN 10÷50	20 x 16	16	16	14	6	28	23	B	10
1RMR125B00	PVC-U system	Manual valves	Ball valves	TKD DN 10÷50	25 x 20	16	19	16	6	34	28	B	13
1RMR132C00	PVC-U system	Manual valves	Ball valves	TKD DN 10÷50	32 x 25	16	22	19	6	42	34	B	37
1RMR140D00	PVC-U system	Manual valves	Ball valves	TKD DN 10÷50	40 x 32	16	26	22	6	51	42	B	55
1RMR150E00	PVC-U system	Manual valves	Ball valves	TKD DN 10÷50	50 x 40	16	31	26	6	61	51	B	80
1RMR163F00	PVC-U system	Manual valves	Ball valves	TKD DN 10÷50	63 x 50	16	38	31	6	75	61	B	130
1RMR175G00	PVC-U system	Manual valves	Ball valves	TKD DN 10÷50	75 x 63	16	44	38	4	89	75	A	210
1RMR190H00	PVC-U system	Manual valves	Ball valves	TKD DN 10÷50	90 x 75	16	51	44	5	106	89	A	370

Size range:

- d 12 ÷ d 315 mm

Nominal pressure:
- PN 16 with water at 20 °C up to d 160 mm, PN 10 from d 180 to d 315
Temperature range: 0 °C ÷ 60 °C
Reference standards:
- ISO 727, EN ISO 1452-3, EN ISO 15493, BS 4346-1, UNI EN 10226-1
Fitting material: PVC-U
Seal material:
- Gaskets in EPDM, on request FKM
- Reinforcing rings (TM3, GM3, MM3, RM3) in stainless steel AISI 430

18 MB, PDF

ASTORE Technical Catalogue

Technical catalogue PVC-U Astore Manual valves