RSV

Repair and reinforcement saddle, SDR11

Repair and reinforcement saddle RSV SDR 11

Gas, water and H2
Working pressure: MOP (gas) 10 bar, PFA (water) 16 bar
Material: PE 100-RC
2 combined saddle components
Safety technology

Note:

Only apply to minor pipe damage.

The damage must be located within the repair area and not in the fusion zone.

PE 100-RC SDR 11

Maximum permissible working pressure 16 bar (water) / 10 bar (gas)

Reference	d₁	d₂	BX	Pallet quantity	t	H	B1	Weight [kg]
615164	90	50	24	192	21	148	155	0,930
615165	110	50	16	128	21	170	178	1,160
615166	125	50	15	120	21	183	190	1,370
615168	160	50	10	80	21	218	225	1,680
615169	180	50	6	48	21	238	240	1,810
615170	200	50	5	40	21	258	250	1,860
615171	225	50	5	40	21	283	255	1,910

Areas of Application

The FRIALEN Repair and Reinforcing Saddles are used for the repair of minor pipe damages.

FRIALEN safety fittings are fusion-capable with PE pipes according to the specifications of the SDR pipe series on the barcode sticker/datasheet of the respective fitting. The minimum wall thicknesses specified in the standards EN1555-1, EN 12201-1 and ISO 4437 must be observed.

Assembly Instructions

The fusion of the HD-PE pipe with the FRIALEN Repair and Reinforcing Saddle takes place by FRIALEN fusing – leakproof and longitudinally strong. In order to avoid discharge of media, the leak has to be sealed with a separate plug (≤ d2).

Both saddles have to prepared according to the general assembly requirements (see assembly instructions: „FRIALEN safety fittings for sustainable pipes for gas, water networks and industrial systems made of PE“) (remove/clean oxide layer from pipe).

Good reasons for using the FRIALEN VVS: