Tapping saddle with female threaded gunmetal outlet
Valve tapping fitting with HD-PE/brass transition
- Operating pressure: MOP (Gas) 10 bar, PFA (Wasser) 16 bar
- Material: PE 100-RC und brass (female thread)
- Safety Technology
- Brass (CW724R) in contact with water according to UBA recommendation
Note:
For use with standard valves.
As a complete solution, we recommend our DAV pressure tapping valve.
PE 100-RC SDR 11
Maximum permissible working pressure 16 bar (water) / 10 bar (gas)
| Reference | d | Rp | BX | Pallet quantity | t | H | B1 | e | Weight |
|---|---|---|---|---|---|---|---|---|---|
| 612794 | 63 | 1 1/4" | 20 | 360 | 23 | 146 | 108 | 58 | 0,730 |
| 612743 | 63 | 1 1/2" | 20 | 360 | 23 | 149 | 108 | 64 | 0,780 |
| 615213 | 75 | 1 1/4" | 15 | 270 | 23 | 161 | 110 | 58 | 0,850 |
| 612798 | 90 | 1 1/2" | 16 | 128 | 27 | 172 | 155 | 81 | 1,380 |
| 612778 | 90 | 2" | 16 | 128 | 27 | 199 | 155 | 81 | 1,570 |
| 612732 | 110 | 1 1/2" | 12 | 96 | 27 | 182 | 178 | 81 | 1,520 |
| 612733 | 110 | 2" | 12 | 96 | 27 | 205 | 178 | 81 | 1,730 |
| 612734 | 125 | 1 1/2" | 12 | 96 | 27 | 207 | 190 | 81 | 1,610 |
| 612735 | 125 | 2" | 12 | 96 | 27 | 234 | 190 | 81 | 1,820 |
| 612728 | 160 | 1 1/2" | 8 | 64 | 27 | 242 | 225 | 81 | 1,810 |
| 612729 | 160 | 2" | 8 | 64 | 27 | 269 | 225 | 81 | 2,040 |
| 612827 | 225 | 2" | 5 | 40 | 27 | 322 | 255 | 81 | 2,000 |
Areas of Application
FRIALEN valve tapping fittings are designed to accommodate standard valves.
FRIALEN safety fittings are fusion-capable with PE pipes according to the specifications of the SDR pipe series on the barcode sticker/datasheet of the respective fitting. The minimum wall thicknesses specified in the standards EN 1555-1, EN 12201-1 and ISO 4437 must be observed.
Assembly Instructions
The fusion of the HD-PE distribution line and the HD-PE house connection line with FRIALEN-valve tapping fitting is carried out by FRIALEN-fusing – tight and longitudinally force-locking.
The saddle and the pipo are prepared according to the general assembly requirements (see assembly instructions: „FRIALEN safety fittings for sustainable pipes for gas, water networks and industrial systems made of PE“) (remove/clean oxide layer from pipe).
Good reasons for using the FRIALEN VAM RG:
- Compact construction
- Open wire technology for direct heat transmission
- Brass transition permanently and securely anchored in the HD-PE
- Preassembled unit without loose parts
- For use with standard valves
- Drilling area free of heating coils
- Thread according to DIN EN 10226-1, ISO 7-1
- Extra wide fusion zone
- Additional barcode for tracing back the fitting (Traceability-Coding)
get_app
get_app
