Transition fitting HD-PE/gunmetal with female thread
Transition fitting gunmetal pipe MUM
- Water
- Maximum pressure: Water 16 bar
- Material: PE 100 and gunmetal (EN 1982 - CC499K-GC, thread to EN 10226-1)
- Safety technology
Note:
Gunmetal side is anchored non-detachable and non-rotatable in the PE.
Self-sealing, patented sealing geometry without elastomeric seal for utilisation in water areas.
Default: Gunmetal, V2A on request.
Other thread dimensions available on request.
PE 100 SDR 11
Maximum permissible working pressure 16 bar (water)
| Reference | d | Rp | BX | PU | D | L | t | z | h | B | Weight kg |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 612595 | 32 | 1" | 20 | 1080 | 47 | 112 | 42 | 49 | 24 | 61 | 0,360 |
| 612596 | 40 | 1 1/4" | 20 | 800 | 58 | 121 | 46 | 53 | 30 | 70 | 0,520 |
| 612692 | 50 | 1 1/2" | 15 | 600 | 70 | 136 | 53 | 60 | 30 | 80 | 0,650 |
| 612708 | 63 | 1 1/2" | 10 | 300 | 84 | 141 | 53 | 61 | 35 | 94 | 1,230 |
| 612693 | 63 | 2" | 10 | 400 | 84 | 141 | 53 | 61 | 35 | 94 | 1,050 |
Other thread dimensions on request
FRIALEN safety fittings can be fused with SDR11 - SDR17.6 pipes, minimum wall thickness s minimum ≥ 3 mm. Other levels of SDR can be processed on request. Please note the mandatory labels directly on the product. DVGW test mark issued: DV-7501AU2256
Areas of Application
FRIALEN-Transition Fittings MUM are threaded joints as an adaptor from a metal pipe with external thread to a HD-PE pipe. Joint on the part of HD-PE by FRIALEN-Coupler.
Assembly Instructions
The threaded component must be held with a spanner to prevent it twisting in the HD-PE component. The fusion of the HD-PE side takes place by FRIALEN-fusing – leakproof and longitudinally strong.
The installation of the gunmetal and the HD-PE side has to be prepared according to the general installation instructions (see ”Transition Fittings with threaded connection” in ”Assembly Instructions” for ”FRIALEN-Safety Fittings for house connections and distribution pipes up to d 225”). This involves removing the oxide skin and cleaning the pipe ends.
Good reasons for using the FRIALEN-Transition Fittings MUM:
- Compact construction
- HD-PE side with exposed heating element for optimal heat transfer
- Cold zones at the end to prevent the flow of molten material
- No holding clamps required
- Large insertion depth, extra wide fusion zones
- Gunmetal end permanently anchored in the HD-PE and will not distort
- Self sealing patented sealing geometry without elastomer seal
- Additional barcode for tracing back the fitting (Traceability-Coding)
get_app
get_app
