
With long outlet spigot
T-piece TA RED SDR 11 with reduced spigot
- Gas, water and H2
- Working pressure: MOP (gas) 10 bar, PFA (water) 16 bar
- Material: PE 100
- Reduced spigots
- Safety technology
- DVGW test mark: DV-8601AU2248, DV-8606AU2249 and DV-8611AU2250
With long outlet spigot

Reference | d1 | d2 | BX | PU | D | L1 | t | t1 | z | h | B | Weight [kg] |
---|---|---|---|---|---|---|---|---|---|---|---|---|
616417 | 32 | 20 | 30 | 540 | 46 | 117 | 44 | 42 | 14 | 22 | 62 | 0,110 |
616418 | 40 | 32 | 20 | 360 | 55 | 148 | 46 | 51 | 28 | 25 | 70 | 0,170 |
616419 | 50 | 32 | 15 | 270 | 69 | 158 | 55 | 51 | 33 | 28 | 82 | 0,300 |
616420 | 50 | 40 | 15 | 270 | 69 | 167 | 55 | 55 | 33 | 28 | 82 | 0,320 |
616421 | 63 | 32 | 10 | 180 | 84 | 173 | 63 | 51 | 36 | 32 | 96 | 0,440 |
616422 | 63 | 40 | 10 | 180 | 84 | 182 | 63 | 55 | 36 | 32 | 96 | 0,450 |
616423 | 63 | 50 | 10 | 180 | 84 | 197 | 63 | 60 | 36 | 32 | 96 | 0,500 |
FRIALEN safety fittings can be fused with SDR11 - SDR17.6 pipes.
Minimum wall thickness s minimum ≥ 3 mm.
Other levels of SDR can be processed on request.
Please note the mandatory labels directly on the product.
DVGW test mark issued: DV-8601AU2248, DV-8606AU2249 and DV-8611AU2250.
Dimension B = Diameter D with contact pin
Areas of Application
The FRIALEN reduced TA red pieces are used for pipe outlets of HD-PE pipelines.
Assembly Instructions
The fusion of the pipe ends with the FRIALEN TA red takes place by FRIALEN-fusing – leakproof and longitudinally strong.
The pipe ends are prepared (removing the oxide layer/cleaning) according to the general installation instructions (see “Assembly Instructions” for “FRIALEN-Safety Fittings for house connections and distribution pipes up to d 225”).
Good reasons for using the FRIALEN TA red:
- Optimised size and flow conditions for branches
- Spigot outlet for maximum flexibility in pipework construction
- Large insertion depths - no retaining clamps necessary
- Open wire design for a secure and high-quality connection
- Long outlets - double length allows for double fusion on pipe diameters up to 63 mm
- Maximum stability thanks to large wall thicknesses
- Traceability coding Additional barcode for component traceability